diff --git a/docs/dragon/q6a/hardware-use/mipi-dsi.md b/docs/dragon/q6a/hardware-use/mipi-dsi.md
index 7a1fb1af1..97bbd02ff 100644
--- a/docs/dragon/q6a/hardware-use/mipi-dsi.md
+++ b/docs/dragon/q6a/hardware-use/mipi-dsi.md
@@ -17,6 +17,15 @@ sidebar_position: 11
 仅支持上表列出的瑞莎官方显示器。第三方显示器（例如 Raspberry Pi 7\" 触控屏）未经官方适配：即使通过转接排线完成物理连接，显示与触控功能仍取决于系统镜像中是否包含匹配的 panel driver / 设备树，无法保证兼容。
 :::
 
+:::note
+上表为屏幕兼容列表，但**并非所有系统镜像都包含全部型号的面板配置**：
+
+- **Radxa OS（Linux）**：上表中的 Display 10 FHD 与 Display 8 HD 均可正常使用。
+- **Android**：当前 Dragon Q6A 的 Android 镜像未包含 Display 10 FHD 的面板配置，**Display 10 FHD 在 Android 下暂不支持**（连接后可能出现黑屏）。
+
+各系统镜像实际支持的屏幕型号以其发布说明为准。
+:::
+
 ## 硬件连接
 
 将 MIPI 显示屏通过 FPC 排线连接到 Dragon Q6A 的 MIPI DSI 接口（39-Pin / 0.3mm 间距 FPC 接口）。
diff --git a/i18n/en/docusaurus-plugin-content-docs/current/dragon/q6a/hardware-use/mipi-dsi.md b/i18n/en/docusaurus-plugin-content-docs/current/dragon/q6a/hardware-use/mipi-dsi.md
index 940a6aba9..5838d11ee 100644
--- a/i18n/en/docusaurus-plugin-content-docs/current/dragon/q6a/hardware-use/mipi-dsi.md
+++ b/i18n/en/docusaurus-plugin-content-docs/current/dragon/q6a/hardware-use/mipi-dsi.md
@@ -17,6 +17,15 @@ The Dragon Q6A has one 4-lane MIPI DSI interface on board for connecting MIPI di
 Only the Radxa official displays listed above are supported. Third-party displays (e.g., the Raspberry Pi 7\" touchscreen) are not officially adapted: even if a physical connection is made with an adapter cable, display and touch functionality depend on whether the system image includes a matching panel driver / device tree, and compatibility cannot be guaranteed.
 :::
 
+:::note
+The table above lists the compatible display models, but **not every system image includes the panel configuration for every model**:
+
+- **Radxa OS (Linux)**: both Display 10 FHD and Display 8 HD in the table above work normally.
+- **Android**: the current Dragon Q6A Android images do not include the panel configuration for Display 10 FHD, so **Display 10 FHD is not currently supported under Android** (it may show a black screen after connection).
+
+The displays actually supported by each system image are subject to the release notes of that image.
+:::
+
 ## Hardware Connection
 
 Connect the MIPI display to the Dragon Q6A's MIPI DSI interface (39-Pin / 0.3mm pitch FPC connector) via an FPC ribbon cable.