Bump the minor-and-patch group with 9 updates

[dependabot]

Bumps the minor-and-patch group with 9 updates:

Package	From	To
vmactions/freebsd-vm	1.5.2	1.5.5
vmactions/openbsd-vm	1.4.5	1.4.7
vmactions/solaris-vm	1.3.8	1.3.9
actions/attest	4.2.1	4.2.2
github/codeql-action/upload-sarif	4.37.3	4.37.9
github/codeql-action/init	4.37.3	4.37.9
github/codeql-action/autobuild	4.37.3	4.37.9
github/codeql-action/analyze	4.37.3	4.37.9
uraimo/run-on-arch-action	3.1.0	3.2.0

Updates vmactions/freebsd-vm from 1.5.2 to 1.5.5

Release notes

Sourced from vmactions/freebsd-vm's releases.

v1.5.5

The runtime moves to anyvm v0.6.5 (from v0.6.4), keeping the whole fleet on one version. This action's surface is unchanged -- same images, same sync methods, same defaults. The bump carries one runtime change of note: on hosts whose nested AMD virtualization corrupts AVX512 XSAVE state, the CPU-feature mask now drops the whole AVX512 family instead of only avx512f.

Full Changelog: vmactions/freebsd-vm@v1.5.4...v1.5.5

v1.5.4

sync: tar

A fourth way to share the workspace, available on every architecture including riscv64 and powerpc64, where rsync and sshfs do not exist:

The workspace is streamed in as a ustar archive over the ssh connection the action already opens, and streamed back the same way when the run finishes. Nothing is installed in the guest and no filesystem support is needed on either side, unlike sshfs and nfs. Verified before shipping: 300 files plus a 1 MB binary blob pushed into a 15.1 guest, a file written inside it, the whole tree pulled back and compared by content hash.

rsync remains the default. Reach for tar when the guest lacks rsync, or when a mount-based method is more machinery than the job needs.

Under the hood

The image builder moves to freebsd-builder v2.2.6 and the runtime to anyvm v0.6.4, nine releases on from what v1.5.3 shipped. Most of that is other guests, but two fixes reach every action:

A failed folder sync used to be a warning. The run continued with the guest missing the files it was about to use, which surfaced much later as a confusing error or a job that sat until its timeout. It is now fatal, and says so.

The workspace push no longer carries the runner's own harness directories into the guest.

Also

The shell note no longer mentions usesh, which has not been needed for some time.

Full Changelog: vmactions/freebsd-vm@v1.5.3...v1.5.4

v1.5.3

... (truncated)

Commits

• f0552d3 Update vmactions/freebsd-vm from base-vm
• 5595fc6 Generated from base-vm
• 0206b2a Sync from base-builder
• 2ed1747 Update vmactions/freebsd-vm from base-vm
• be1c6e8 Generated from base-vm
• bddcfce Update vmactions/freebsd-vm from base-vm
• 139a2cb Generated from base-vm
• 0a1a391 Update version to v1.5.4
• 759dd0c Update vmactions/freebsd-vm from base-vm
• b5370dd Generated from base-vm
• Additional commits viewable in compare view

Updates vmactions/openbsd-vm from 1.4.5 to 1.4.7

Release notes

Sourced from vmactions/openbsd-vm's releases.

v1.4.7

sync: tar

A new way to share the workspace, available on every architecture: the tree is streamed in as a ustar archive over the ssh connection the action already opens, and streamed back the same way when the run finishes. Nothing is installed in the guest and no filesystem support is needed on either side, unlike sshfs and nfs. openbsd-builder v2.1.0 declares it for every release, and it was verified on this guest before the declaration went in: 300 files plus a 1 MB binary blob pushed, a file written inside the VM, the whole tree pulled back and compared by content hash.

rsync remains the default.

Under the hood

openbsd-builder v2.1.0 is also the first openbsd build to publish releases.json, the machine-readable index this action bakes its configuration from -- which is why the pre-tar method list survived until now.

The runtime moves to anyvm v0.6.5, ten releases on from the v0.5.5 that v1.4.6 shipped. Two of its fixes reach every job: a failed folder sync is now fatal instead of a warning that left the guest running without the files it was about to use, and the workspace push no longer carries the runner's own harness directories into the guest.

Full Changelog: vmactions/openbsd-vm@v1.4.6...v1.4.7

v1.4.6

support major release.

Full Changelog: vmactions/openbsd-vm@v1.4.5...v1.4.6

Commits

• 86cdc08 Update vmactions/openbsd-vm from base-vm
• 4d73785 Generated from base-vm
• e327e92 Sync from base-builder
• 533018c Update vmactions/openbsd-vm from base-vm
• 222bcdb Generated from base-vm
• 73697f6 Update vmactions/openbsd-vm from base-vm
• e334303 Generated from base-vm
• a824726 Update version to v1.4.6
• 8ddee6b Update vmactions/openbsd-vm from base-vm
• 3c73357 Generated from base-vm
• Additional commits viewable in compare view

Updates vmactions/solaris-vm from 1.3.8 to 1.3.9

Release notes

Sourced from vmactions/solaris-vm's releases.

v1.3.9

sync: tar

A new way to share the workspace: the tree is streamed in as a ustar archive over the ssh connection the action already opens, and streamed back the same way when the run finishes. Nothing is installed in the guest and no filesystem support is needed on either side, unlike nfs. solaris-builder v2.0.7 declares it for every release, and it was verified on this guest before the declaration went in: 300 files plus a 1 MB binary blob pushed, a file written inside the VM, the whole tree pulled back and compared by content hash.

rsync remains the default.

Under the hood

solaris-builder v2.0.7 is also the first solaris build to publish releases.json, the machine-readable index this action bakes its configuration from -- which is why the pre-tar method list survived until now.

The runtime moves to anyvm v0.6.5, fifteen releases on from the v0.5.0 that v1.3.8 shipped. Two of its fixes reach every job: a failed folder sync is now fatal instead of a warning that left the guest running without the files it was about to use, and the workspace push no longer carries the runner's own harness directories into the guest.

Full Changelog: vmactions/solaris-vm@v1.3.8...v1.3.9

Commits

• 96d8d97 Update vmactions/solaris-vm from base-vm
• f13d129 Generated from base-vm
• f841832 Sync from base-builder
• cb8e2d9 Update vmactions/solaris-vm from base-vm
• 2627719 Generated from base-vm
• 31fc30b Update vmactions/solaris-vm from base-vm
• 8a05dca Generated from base-vm
• a5f8cf8 Update version to v1.3.8
• d45c57a Update vmactions/solaris-vm from base-vm
• a0ddca6 Generated from base-vm
• Additional commits viewable in compare view

Updates actions/attest from 4.2.1 to 4.2.2

Release notes

Sourced from actions/attest's releases.

v4.2.2

What's Changed

• Bump @​sigstore/oci from 0.7.1 to 0.7.2 by @​bdehamer in actions/attest#469
• Bump brace-expansion by @​dependabot[bot] in actions/attest#468
• Bump ip-address from 10.2.0 to 10.4.0 by @​dependabot[bot] in actions/attest#467

Full Changelog: actions/attest@v4.2.1...v4.2.2

Commits

• 1e69f48 Bump ip-address from 10.2.0 to 10.4.0 (#467)
• 02787ce Bump brace-expansion (#468)
• 98ac037 bump @​sigstore/oci from 0.7.1 to 0.7.2 (#469)
• See full diff in compare view

Updates github/codeql-action/upload-sarif from 4.37.3 to 4.37.9

Release notes

Sourced from github/codeql-action/upload-sarif's releases.

v4.37.9

• Update default CodeQL bundle version to 2.26.4. #4106

v4.37.8

No user facing changes.

v4.37.7

• Update default CodeQL bundle version to 2.26.3. #4085

v4.37.6

• Changed the default filepath for the new remote file address format that was introduced in CodeQL Action 4.37.0 / 3.37.0 to .github/codeql-config.yml to align it with the suggested path that is used elsewhere. #4070

v4.37.5

• Fixed a bug where a network error while streaming the download of the CodeQL bundle could terminate the init Action instead of falling back to downloading the bundle before extracting it. #4061

v4.37.4

• This version of the CodeQL Action adds support for the tools input for the codeql-action/init step to be specified using a github-codeql-tools repository property. This feature will gradually be rolled out following the release of this version. Once rolled out, this allows for the CodeQL CLI version that is used in GitHub-managed workflows, such as Default Setup, to be set to a custom value. For example, customers who run into issues with rate limits when a new CodeQL CLI version is released can set the value to toolcache to always use the CodeQL CLI version that is available in the runner toolcache. For Advanced Setup workflows, the value provided for tools in the workflow definition always takes precedence unless the value of the repository property starts with !. #4037
• Update default CodeQL bundle version to 2.26.2. #4051

Changelog

Sourced from github/codeql-action/upload-sarif's changelog.

CodeQL Action Changelog

See the releases page for the relevant changes to the CodeQL CLI and language packs.

[UNRELEASED]

No user facing changes.

4.37.9 - 26 Aug 2026

• Update default CodeQL bundle version to 2.26.4. #4106

4.37.8 - 21 Aug 2026

No user facing changes.

4.37.7 - 13 Aug 2026

• Update default CodeQL bundle version to 2.26.3. #4085

4.37.6 - 04 Aug 2026

• Changed the default filepath for the new remote file address format that was introduced in CodeQL Action 4.37.0 / 3.37.0 to .github/codeql-config.yml to align it with the suggested path that is used elsewhere. #4070

4.37.5 - 03 Aug 2026

• Fixed a bug where a network error while streaming the download of the CodeQL bundle could terminate the init Action instead of falling back to downloading the bundle before extracting it. #4061

4.37.4 - 29 Jul 2026

• This version of the CodeQL Action adds support for the tools input for the codeql-action/init step to be specified using a github-codeql-tools repository property. This feature will gradually be rolled out following the release of this version. Once rolled out, this allows for the CodeQL CLI version that is used in GitHub-managed workflows, such as Default Setup, to be set to a custom value. For example, customers who run into issues with rate limits when a new CodeQL CLI version is released can set the value to toolcache to always use the CodeQL CLI version that is available in the runner toolcache. For Advanced Setup workflows, the value provided for tools in the workflow definition always takes precedence unless the value of the repository property starts with !. #4037
• Update default CodeQL bundle version to 2.26.2. #4051

4.37.3 - 22 Jul 2026

No user facing changes.

4.37.2 - 21 Jul 2026

• The new address format for the config-file input that was introduced in CodeQL Action 4.37.0 is now enabled by default. In addition to the format described there, the remote= prefix can now be used to explicitly indicate that the input refers to a remote file. All previous input formats continue to be accepted as well. #4023
• The CodeQL Action can now make use of configured private registries in Default Setup to retrieve CodeQL configuration files from remote repositories that require authentication. This will allow customers to store their CodeQL configuration in a single repository that can then be referenced by Default Setup workflows in other repositories. We expect to roll this and other, related changes out to everyone in July. #4007

4.37.1 - 16 Jul 2026

• Upcoming breaking change: Add a deprecation warning for customers using CodeQL version 2.20.6 and earlier. These versions of CodeQL were discontinued on 1 July 2026 alongside GitHub Enterprise Server 3.16, and will be unsupported by the next minor release of the CodeQL Action. #3956
• Update default CodeQL bundle version to 2.26.1. #4019

4.37.0 - 08 Jul 2026

• Update default CodeQL bundle version to 2.26.0. #3995

... (truncated)

Commits

• cdf488f Merge pull request #4107 from github/update-v4.37.9-920ba7cd1
• 7243f38 Update changelog for v4.37.9
• 920ba7c Merge pull request #4106 from github/update-bundle/codeql-bundle-v2.26.4
• ecfa6e1 Add changelog note
• adcdf4a Update default bundle to codeql-bundle-v2.26.4
• 486fec2 Merge pull request #4099 from github/update-supported-enterprise-server-versions
• 134624c Merge pull request #4101 from github/dependabot/npm_and_yarn/npm-minor-457d82...
• ff43db8 Merge pull request #4103 from github/mergeback/v4.37.8-to-main-db488dde
• 4605e03 Rebuild
• 099c869 Update changelog and version after v4.37.8
• Additional commits viewable in compare view

Updates github/codeql-action/init from 4.37.3 to 4.37.9

Release notes

Sourced from github/codeql-action/init's releases.

v4.37.9

• Update default CodeQL bundle version to 2.26.4. #4106

v4.37.8

No user facing changes.

v4.37.7

• Update default CodeQL bundle version to 2.26.3. #4085

v4.37.6

• Changed the default filepath for the new remote file address format that was introduced in CodeQL Action 4.37.0 / 3.37.0 to .github/codeql-config.yml to align it with the suggested path that is used elsewhere. #4070

v4.37.5

• Fixed a bug where a network error while streaming the download of the CodeQL bundle could terminate the init Action instead of falling back to downloading the bundle before extracting it. #4061

v4.37.4

• This version of the CodeQL Action adds support for the tools input for the codeql-action/init step to be specified using a github-codeql-tools repository property. This feature will gradually be rolled out following the release of this version. Once rolled out, this allows for the CodeQL CLI version that is used in GitHub-managed workflows, such as Default Setup, to be set to a custom value. For example, customers who run into issues with rate limits when a new CodeQL CLI version is released can set the value to toolcache to always use the CodeQL CLI version that is available in the runner toolcache. For Advanced Setup workflows, the value provided for tools in the workflow definition always takes precedence unless the value of the repository property starts with !. #4037
• Update default CodeQL bundle version to 2.26.2. #4051

Changelog

Sourced from github/codeql-action/init's changelog.

CodeQL Action Changelog

See the releases page for the relevant changes to the CodeQL CLI and language packs.

[UNRELEASED]

No user facing changes.

4.37.9 - 26 Aug 2026

• Update default CodeQL bundle version to 2.26.4. #4106

4.37.8 - 21 Aug 2026

No user facing changes.

4.37.7 - 13 Aug 2026

• Update default CodeQL bundle version to 2.26.3. #4085

4.37.6 - 04 Aug 2026

• Changed the default filepath for the new remote file address format that was introduced in CodeQL Action 4.37.0 / 3.37.0 to .github/codeql-config.yml to align it with the suggested path that is used elsewhere. #4070

4.37.5 - 03 Aug 2026

• Fixed a bug where a network error while streaming the download of the CodeQL bundle could terminate the init Action instead of falling back to downloading the bundle before extracting it. #4061

4.37.4 - 29 Jul 2026

• This version of the CodeQL Action adds support for the tools input for the codeql-action/init step to be specified using a github-codeql-tools repository property. This feature will gradually be rolled out following the release of this version. Once rolled out, this allows for the CodeQL CLI version that is used in GitHub-managed workflows, such as Default Setup, to be set to a custom value. For example, customers who run into issues with rate limits when a new CodeQL CLI version is released can set the value to toolcache to always use the CodeQL CLI version that is available in the runner toolcache. For Advanced Setup workflows, the value provided for tools in the workflow definition always takes precedence unless the value of the repository property starts with !. #4037
• Update default CodeQL bundle version to 2.26.2. #4051

4.37.3 - 22 Jul 2026

No user facing changes.

4.37.2 - 21 Jul 2026

• The new address format for the config-file input that was introduced in CodeQL Action 4.37.0 is now enabled by default. In addition to the format described there, the remote= prefix can now be used to explicitly indicate that the input refers to a remote file. All previous input formats continue to be accepted as well. #4023
• The CodeQL Action can now make use of configured private registries in Default Setup to retrieve CodeQL configuration files from remote repositories that require authentication. This will allow customers to store their CodeQL configuration in a single repository that can then be referenced by Default Setup workflows in other repositories. We expect to roll this and other, related changes out to everyone in July. #4007

4.37.1 - 16 Jul 2026

• Upcoming breaking change: Add a deprecation warning for customers using CodeQL version 2.20.6 and earlier. These versions of CodeQL were discontinued on 1 July 2026 alongside GitHub Enterprise Server 3.16, and will be unsupported by the next minor release of the CodeQL Action. #3956
• Update default CodeQL bundle version to 2.26.1. #4019

4.37.0 - 08 Jul 2026

• Update default CodeQL bundle version to 2.26.0. #3995

... (truncated)

Commits

• cdf488f Merge pull request #4107 from github/update-v4.37.9-920ba7cd1
• 7243f38 Update changelog for v4.37.9
• 920ba7c Merge pull request #4106 from github/update-bundle/codeql-bundle-v2.26.4
• ecfa6e1 Add changelog note
• adcdf4a Update default bundle to codeql-bundle-v2.26.4
• 486fec2 Merge pull request #4099 from github/update-supported-enterprise-server-versions
• 134624c Merge pull request #4101 from github/dependabot/npm_and_yarn/npm-minor-457d82...
• ff43db8 Merge pull request #4103 from github/mergeback/v4.37.8-to-main-db488dde
• 4605e03 Rebuild
• 099c869 Update changelog and version after v4.37.8
• Additional commits viewable in compare view

Updates github/codeql-action/autobuild from 4.37.3 to 4.37.9

Release notes

Sourced from github/codeql-action/autobuild's releases.

v4.37.9

• Update default CodeQL bundle version to 2.26.4. #4106

v4.37.8

No user facing changes.

v4.37.7

• Update default CodeQL bundle version to 2.26.3. #4085

v4.37.6

• Changed the default filepath for the new remote file address format that was introduced in CodeQL Action 4.37.0 / 3.37.0 to .github/codeql-config.yml to align it with the suggested path that is used elsewhere. #4070

v4.37.5

• Fixed a bug where a network error while streaming the download of the CodeQL bundle could terminate the init Action instead of falling back to downloading the bundle before extracting it. #4061

v4.37.4

• This version of the CodeQL Action adds support for the tools input for the codeql-action/init step to be specified using a github-codeql-tools repository property. This feature will gradually be rolled out following the release of this version. Once rolled out, this allows for the CodeQL CLI version that is used in GitHub-managed workflows, such as Default Setup, to be set to a custom value. For example, customers who run into issues with rate limits when a new CodeQL CLI version is released can set the value to toolcache to always use the CodeQL CLI version that is available in the runner toolcache. For Advanced Setup workflows, the value provided for tools in the workflow definition always takes precedence unless the value of the repository property starts with !. #4037
• Update default CodeQL bundle version to 2.26.2. #4051

Changelog

Sourced from github/codeql-action/autobuild's changelog.

CodeQL Action Changelog

See the releases page for the relevant changes to the CodeQL CLI and language packs.

[UNRELEASED]

No user facing changes.

4.37.9 - 26 Aug 2026

• Update default CodeQL bundle version to 2.26.4. #4106

4.37.8 - 21 Aug 2026

No user facing changes.

4.37.7 - 13 Aug 2026

• Update default CodeQL bundle version to 2.26.3. #4085

4.37.6 - 04 Aug 2026

• Changed the default filepath for the new remote file address format that was introduced in CodeQL Action 4.37.0 / 3.37.0 to .github/codeql-config.yml to align it with the suggested path that is used elsewhere. #4070

4.37.5 - 03 Aug 2026

• Fixed a bug where a network error while streaming the download of the CodeQL bundle could terminate the init Action instead of falling back to downloading the bundle before extracting it. #4061

4.37.4 - 29 Jul 2026

• This version of the CodeQL Action adds support for the tools input for the codeql-action/init step to be specified using a github-codeql-tools repository property. This feature will gradually be rolled out following the release of this version. Once rolled out, this allows for the CodeQL CLI version that is used in GitHub-managed workflows, such as Default Setup, to be set to a custom value. For example, customers who run into issues with rate limits when a new CodeQL CLI version is released can set the value to toolcache to always use the CodeQL CLI version that is available in the runner toolcache. For Advanced Setup workflows, the value provided for tools in the workflow definition always takes precedence unless the value of the repository property starts with !. #4037
• Update default CodeQL bundle version to 2.26.2. #4051

4.37.3 - 22 Jul 2026

No user facing changes.

4.37.2 - 21 Jul 2026

• The new address format for the config-file input that was introduced in CodeQL Action 4.37.0 is now enabled by default. In addition to the format described there, the remote= prefix can now be used to explicitly indicate that the input refers to a remote file. All previous input formats continue to be accepted as well. #4023
• The CodeQL Action can now make use of configured private registries in Default Setup to retrieve CodeQL configuration files from remote repositories that require authentication. This will allow customers to store their CodeQL configuration in a single repository that can then be referenced by Default Setup workflows in other repositories. We expect to roll this and other, related changes out to everyone in July. #4007

4.37.1 - 16 Jul 2026

• Upcoming breaking change: Add a deprecation warning for customers using CodeQL version 2.20.6 and earlier. These versions of CodeQL were discontinued on 1 July 2026 alongside GitHub Enterprise Server 3.16, and will be unsupported by the next minor release of the CodeQL Action. #3956
• Update default CodeQL bundle version to 2.26.1. #4019

4.37.0 - 08 Jul 2026

• Update default CodeQL bundle version to 2.26.0. #3995

... (truncated)

Commits

• cdf488f Merge pull request #4107 from github/update-v4.37.9-920ba7cd1
• 7243f38 Update changelog for v4.37.9
• 920ba7c Merge pull request #4106 from github/update-bundle/codeql-bundle-v2.26.4
• ecfa6e1 Add changelog note
• adcdf4a Update default bundle to codeql-bundle-v2.26.4
• 486fec2 Merge pull request #4099 from github/update-supported-enterprise-server-versions
• 134624c Merge pull request #4101 from github/dependabot/npm_and_yarn/npm-minor-457d82...
• ff43db8 Merge pull request #4103 from github/mergeback/v4.37.8-to-main-db488dde
• 4605e03 Rebuild
• 099c869 Update changelog and version after v4.37.8
• Additional commits viewable in compare view

Updates github/codeql-action/analyze from 4.37.3 to 4.37.9

Release notes

Sourced from github/codeql-action/analyze's releases.

v4.37.9

• Update default CodeQL bundle version to 2.26.4. #4106

v4.37.8

No user facing changes.

v4.37.7

• Update default CodeQL bundle version to 2.26.3. #4085

v4.37.6

• Changed the default filepath for the new remote file address format that was introduced in CodeQL Action 4.37.0 / 3.37.0 to .github/codeql-config.yml to align it with the suggested path that is used elsewhere. #4070

v4.37.5

• Fixed a bug where a network error while streaming the download of the CodeQL bundle could terminate the init Action instead of falling back to downloading the bundle before extracting it. #4061

v4.37.4

• This version of the CodeQL Action adds support for the tools input for the codeql-action/init step to be specified using a github-codeql-tools repository property. This feature will gradually be rolled out following the release of this version. Once rolled out, this allows for the CodeQL CLI version that is used in GitHub-managed workflows, such as Default Setup, to be set to a custom value. For example, customers who run into issues with rate limits when a new CodeQL CLI version is released can set the value to toolcache to always use the CodeQL CLI version that is available in the runner toolcache. For Advanced Setup workflows, the value provided for tools in the workflow definition always takes precedence unless the value of the repository property starts with !. #4037
• Update default CodeQL bundle version to 2.26.2. #4051

Changelog

Sourced from github/codeql-action/analyze's changelog.

CodeQL Action Changelog

See the releases page for the relevant changes to the CodeQL CLI and language packs.

[UNRELEASED]

No user facing changes.

4.37.9 - 26 Aug 2026

• Update default CodeQL bundle version to 2.26.4. #4106

4.37.8 - 21 Aug 2026

No user facing changes.

4.37.7 - 13 Aug 2026

• Update default CodeQL bundle version to 2.26.3. #4085

4.37.6 - 04 Aug 2026

• Changed the default filepath for the new remote file address format that was introduced in CodeQL Action 4.37.0 / 3.37.0 to .github/codeql-config.yml to align it with the suggested path that is used elsewhere. #4070

4.37.5 - 03 Aug 2026

• Fixed a bug where a network error while streaming the download of the CodeQL bundle could terminate the init Action instead of falling back to downloading the bundle before extracting it. #4061

4.37.4 - 29 Jul 2026

• This version of the CodeQL Action adds support for the tools input for the codeql-action/init step to be specified using a github-codeql-tools repository property. This feature will gradually be rolled out following the release of this version. Once rolled out, this allows for the CodeQL CLI version that is used in GitHub-managed workflows, such as Default Setup, to be set to a custom value. For example, customers who run into issues with rate limits when a new CodeQL CLI version is released can set the value to toolcache to always use the CodeQL CLI version that is available in the runner toolcache. For Advanced Setup workflows, the value provided for tools in the workflow definition always takes precedence unless the value of the repository property starts with !. #4037
• Update default CodeQL bundle version to 2.26.2. #4051

4.37.3 - 22 Jul 2026

No user facing changes.

4.37.2 - 21 Jul 2026

• The new address format for the config-file input that was introduced in CodeQL Action 4.37.0 is now enabled by default. In addition to the format described there, the remote= prefix can now be used to explicitly indicate that the input refers to a remote file. All previous input formats continue to be accepted as well. #4023
• The CodeQL Action can now make use of configured private registries in Default Setup to retrieve CodeQL configuration files from remote repositories that require authentication. This will allow customers to store their CodeQL configuration in a single repository that can then be referenced by Default Setup workflows in other repositories. We expect to roll this and other, related changes out to everyone in July. #4007

4.37.1 - 16 Jul 2026

• Upcoming breaking change: Add a deprecation warning for customers using CodeQL version 2.20.6 and earlier. These versions of CodeQL were discontinued on 1 July 2026 alongside GitHub Enterprise Server 3.16, and will be unsupported by the next minor release of the CodeQL Action. #3956
• Update default CodeQL bundle version to 2.26.1. #4019

4.37.0 - 08 Jul 2026

• Update default CodeQL bundle version to 2.26.0. #3995

... (truncated)

Commits

• cdf488f Merge pull request #4107 from github/update-v4.37.9-920ba7cd1
• 7243f38 Update changelog for v4.37.9
• 920ba7c Merge pull request #4106 from github/update-bundle/codeql-bundle-v2.26.4
• ecfa6e1 Add changelog note
• adcdf4a Update default bundle to codeql-bundle-v2.26.4
• 486fec2 Merge pull request #4099 from github/update-supported-enterprise-server-versions
• 134624c Merge pull request #4101 from github/dependabot/npm_and_yarn/npm-minor-457d82...
• ff43db8 Merge pull request #4103 from github/mergeback/v4.37.8-to-main-db488dde
• 4605e03 Rebuild
• 099c869 Update changelog and version after v4.37.8
• Additional commits viewable in compare view

Updates uraimo/run-on-arch-action from 3.1.0 to 3.2.0

Release notes

Sourced from uraimo/run-on-arch-action's releases.

3.2.0

What's Changed

• Bumped actions/checkout -> v6 (node24 compatibility) by @​xavier2k6 in uraimo/run-on-arch-action#172
• Update deprecated set-output, fixes #171 by @​uraimo in uraimo/run-on-arch-action#173
• Add docs link for the GitHub token parameter by @​eXpl0it3r in uraimo/run-on-arch-action#148
• Added trixie for aarch64 and armv7 by @​rf152 in uraimo/run-on-arch-action#175
• Add loongarch64 support by @​cheungxi in uraimo/run-on-arch-action#176

New Contributors

• @​eXpl0it3r made their first contribution in uraimo/run-on-arch-action#148
• @​rf152 made their first contribution in uraimo/run-on-arch-action#175
• @​cheungxi made their first contribution in uraimo/run-on-arch-action#176

Full Changelog: uraimo/run-on-arch-action@v3.1.0...v3.2.0

Commits

• 460cb8e Merge pull request #176 from cheungxi/agent/add-loongarch64-support
• 32262e9 Add loongarch64 support
• f5a337e Merge pull request #175 from rf152/master
• 378be72 Added trixie for aarch64 and armv7
• 252d804 Merge pull request #148 from eXpl0it3r/feature/link-github-token
• 1d373fc Merge pull request #173 from uraimo/bugfix-set-output
• 596559a Update deprecated set-output, fixes #171
• 7711f7b Merge pull request #172 from xavier2k6/arch_act_p2
• 16c2493 Bumped actions/checkout -> v6 (node24 compatibility)
• See full diff in compare view

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.

---

Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

• @dependabot rebase will rebase this PR
• @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
• @dependabot show <dependency name> ignore conditions will show all of the ignore conditions of the specified dependency
• @dependabot ignore <dependency name> major version will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself)
• @dependabot ignore <dependency name> minor version will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself)
• @dependabot ignore <dependency name> will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself)
• @dependabot unignore <dependency name> will remove all of the ignore conditions of the specified dependency
• @dependabot unignore <dependency name> <ignore condition> will remove the ignore condition of the specified dependency and ignore conditions