Hi there✨, feel free to read my prioritization🐣! Currently I work on:

• Making SelfPrivacy self-hostable, for free over tor (and https on your own domain).

• Ensuring the visualisation of the open source bookkeeping TUI that is built around hledger makes sense, is fully auto-generated and can be self-hosted on a .git of the above SelfPrivacy setup/onion.
• Setting up self-hosted, privacy, friendly AI's to parse receipt images so that they get embedded into your hledger setup.
• Ideally, I would like to set up collective training and/or inference of those receipt-image-parsing-AI modules using FHE.

• Using a tactile-sensing glove to train an open source humanoid/robot arm to build the CNC that is able to build itself (with that humanoid/robot).
• I am aware the open source CNC will probably not be able to build the hardware of the open source humanoid/robot.
• Note, I had a short scare of reinventing the wheel when I found this open source cnc which already has a solid design. The main advantage of the inspired cnc design is (material) cost/strength. Instead of having an aluminum gantry I expect a beamed-gantry with truss (albeit with (steel) wiring) could have the same strength at lower cost or increased strength at equal cost. However, for the cnc performance metrics I:
• Disregard:
  • speed [m/s] per materialtype as I aim at bootstrapping cnc creation, parallelization would come at cnc material costs if more speed is required, I doubt I will reach demand for volumes that require that.
  • Mean Time Between Failures [hours]
  • Mean Time To Repair [hours]
  • Availability [%]
  • Energy consumption [kWh] as I do not yet have enough experience in operating cnc's to form an opinion about the effort/reward.
• Value:
  • Axis travel / work envelope — mm (X × Y × Z travel)
  • Position Accuracy [mm]
  • Repeatability [mm]
  • Surface roughness [Ra in µm]
• Ideally I would like to see if I can mod/use the Open Source Motorized XYZ Micro-Manipulator to increase the number of components that can be bootstrapped in the above cnc endeavor (thanks to the increased accuracy).

• High-quality, auto-generated and fabricated (with above CNC humanoid/robot arm combo), based on your own hand shape/finger positioning. Just so I can do the above work with a proper keyboard 🤔

• Out of principle I still like to build and deploy the TruCol protocol.

• To gain more experience with deployment and production ready fund management in adversarial environments.

Feel free to have a look or pick up a small subtask💫