Skip to content

chore(deps): update dev minor+patch - #109

Open
renovate[bot] wants to merge 1 commit into
masterfrom
renovate/dev-minor+patch
Open

chore(deps): update dev minor+patch#109
renovate[bot] wants to merge 1 commit into
masterfrom
renovate/dev-minor+patch

Conversation

@renovate

@renovate renovate Bot commented Oct 7, 2026 •
edited
Loading

Copy link
Copy Markdown
Contributor

ℹ️ Note

This PR body was truncated due to platform limits.

This PR contains the following updates:

Package Change Age Confidence
@types/sanitize-html (source) ^2.16.1 → ^2.16.2 age confidence
@types/ws (source) ^8.18.1 → ^8.18.2 age confidence
@vitejs/plugin-react (source) ^6.0.3 → ^6.1.2 age confidence
esbuild ^0.28.1 → ^0.28.2 age confidence
eslint-plugin-react-refresh ^0.5.3 → ^0.5.7 age confidence
eslint-plugin-react-you-might-not-need-an-effect ^1.0.1 → ^1.0.2 age confidence
knip (source) ^6.24.0 → ^6.40.0 age confidence
tsx (source) ^4.22.5 → ^4.23.15 age confidence
vite (source) ^8.1.3 → ^8.3.3 age confidence

Release Notes

vitejs/vite-plugin-react (@​vitejs/plugin-react)

v6.1.2

Compare Source

Fix HMR for compound components (#​1484)

Adding or removing a component from a compound component was not handled, creating stale updates. Doing this now triggers hmr invalidate on the file and propagates the invalidation to importers.

Fix compiler.logDiagnostics option not working (#​1483)

With oxc-transform-react >= 0.148, the logDiagnostics was not working. This version fixes it and requires oxc-transform-react >= 0.152 as a peer dependency if you are using the compiler option. compiler.logDiagnostics option is now deprecated and should be swapped for the builtin compiler.reportDiagnostics.

Disable refresh for non-jsx with compiler enabled (fix #​1478) (#​1485)

When the compiler was enabled, TS files could trigger fast refresh which would cause runtime errors. The logic now follows what the builtin oxc plugin in Vite does.

v6.1.1

Compare Source

Add compiler.logDiagnostics option

Recoverable React Compiler diagnostics are no longer logged by default. Set compiler.logDiagnostics to true to log them through Vite. Fatal diagnostics are always logged and fail the transform.

Respect environment sourcemap option for React Compiler transform when builder.sharedPlugins is enabled (#​1439)

The React Compiler transform was using the top-level sourcemap option instead of the environment sourcemap option. This caused a problem when the experimental builder.sharedPlugins was enabled.

v6.1.0

Compare Source

Add experimental native React Compiler support (#​1419)

Add experimental native React Compiler support.

You can use it by installing oxc-transform-react and enabling it via the compiler option:

npm install -D oxc-transform-react
import { defineConfig } from 'vite'
import react from '@vitejs/plugin-react'

export default defineConfig({
  plugins: [
     react({ compiler: true })
  ]
})

v6.0.5

Compare Source

Fixed the react compiler preset filter to be linear (#​1353)

The improved filter in v6.0.3 was non-linear and caused a performance regression (#​1349). The filter was changed to be linear to avoid that.

v6.0.4

Compare Source

Fixed $RefreshSig$ is not defined error when running vite dev with NODE_ENV=production

When running vite dev with NODE_ENV=production, the app errored with $RefreshSig$ is not defined.
This error is now fixed.

evanw/esbuild (esbuild)

v0.28.2

Compare Source

  • Fix tree shaking bug due to TypeScript import alias (#​4507)

    This release fixes a bug that could cause esbuild to incorrectly tree-shake imports that are used in a TypeScript type alias under certain circumstances. Affected code uses a TypeScript-specific import assignment and looks something like this:

    import Base from './dep.js';
import Alias = Base.SomeType;

  • Fix CSS minification bug involving & (#​4497)

    This release fixes a bug where esbuild's CSS minifier incorrectly removed a & when it was unsafe to do so. Here is an example:

    /* Original code */
.a .b {
  & .b:not(& .c) {
    color: red;
  }
}

/* Old output (with --minify) */
.a .b{.b:not(& .c){color:red}}

/* New output (with --minify) */
.a .b{& .b:not(& .c){color:red}}

    This should match <span class="a"><span class="b"><span class="b">yes</span></span></span> but not <span class="a"><span class="b">no</span></span>. The old output incorrectly matched both.

  • Avoid overwriting input files without --allow-overwrite (#​4484)

    For example: esbuild input.js --outfile=input.js tells esbuild to overwrite input.js with the output of running esbuild on it. This was supposed to already be prevented by default, but it accidentally regressed in version 0.17.0 and apparently didn't have any test coverage. The error message was being printed but the input file was still being overwritten. Oops.

    This release puts the original behavior back. With this release, esbuild should now actually avoid overwriting input files unless --allow-overwrite is explicitly present. This is done by not writing out any files when a build error is encountered.

  • Fix incorrect code generated when using top-level await (#​4498)

    Previously esbuild could generate code containing a syntax error in complex scenarios involving top-level await used in a dependency cycle. The problem was a missing async on one or more module wrapper closures. With this release, esbuild now uses a fixed-point iteration algorithm to correctly annotate all dependencies in the cycle as needing an async module wrapper.

  • Fix a minification bug with lowered logical assignment operators (#​4508)

    This release fixes a bug that could cause esbuild to generate incorrect code for logical assignment operators when lowering them to an older target environment. Specifically the lowering process requires duplicating the left-hand side, but esbuild incorrectly failed to count the duplicate as a new usage when the left-hand side is an identifier. That then caused the minifier to believe that the left-hand side was only used once and could attempt to incorrectly inline an initializer into the first usage. This bug has now been fixed:

    // Original code
function foo() {
  let x
  bar(x ||= {})
}

// Old output (with --minify-syntax --target=es6)
function foo() {
  bar(void 0 || (x = {}));
}

// New output (with --minify-syntax --target=es6)
function foo() {
  let x;
  bar(x || (x = {}));
}

  • Fix a potential deadlock when the JavaScript API is used incorrectly (#​4503, #​4506)

    The JavaScript API runs the native esbuild executable as a long-lived child process and communicates with it over stdin/stdout/stderr. Each API request is asynchronous and the executable stays open as long as it has work to do, which is as long as either stdin is still open (meaning there may be more API requests) or there are currently requests being processed.

    Previously esbuild's tracking of outstanding API requests missed decrementing a reference count in an edge case where esbuild's JavaScript API was used incorrectly and the API request returned an error. This could in some cases cause esbuild's native executable to exit with an error message about a deadlock. This release fixes the reference counting bug.

    This fix was submitted by @​ZuBB.

  • Handle target collisions (#​4509)

    It's possible to specify the same target engine multiple times, such as with --target=chrome1,chrome99. This edge case wasn't anticipated and previously took the last version for the duplicated target engine instead of the minimum version (so chrome99 in this case instead of chrome1). With this release, esbuild will now pick the minimum version between all duplicated target engines.

  • Force .mp3 files to use the audio/mpeg MIME type (#​4485)

    MIME type detection for esbuild's data URLs uses Go's built-in MIME type detection, which is based on the MIME sniffing standard. This works correctly for MP3 files that start with the byte sequence ID3, which is commonly the case. However, it's possible to construct valid MP3 files that do not start with ID3, and that perhaps Go's built-in MIME type detection doesn't implement the "Signature for MP3 without ID3" part of the algorithm. This results in some .mp3 files incorrectly using the application/octet-stream MIME type instead of audio/mpeg. With this release, esbuild will now always use the audio/mpeg MIME type for files ending in .mp3.

  • Add a new TypeScript syntax warning

    TypeScript 7 turned some previously-valid TypeScript syntax into a syntax error because it was confusing. TypeScript 6 accepts 1 + 2 as number * 3 as valid syntax but confusingly converts it to (1 + 2) * 3 instead of the more intuitive conversion to 1 + (2 * 3). This syntax is now an error in TypeScript 7+. With this release, esbuild will now warn about the use of this syntax:

    ▲ [WARNING] Operator "*" should not directly follow a TypeScript type cast after the "+" operator [confusing-typescript-cast]

    example.ts:1:28:
      1 │ console.log(1 + 2 as number * 3)
        ╵                             ^

  This is a syntax error in newer versions of TypeScript because the type cast has unintuitive
  precedence in this case. Surround the inner expression in parentheses to silence this warning:

    example.ts:1:12:
      1 │ console.log(1 + 2 as number * 3)
        │             ~~~~~~~~~~~~~~~
        ╵             (             )

    See microsoft/TypeScript#63527 for more information.

  • Add support for formatting errors for Visual Studio (#​4460)

    Visual Studio has a specific style that it expects log messages to be in for them to show up in the UI when esbuild is run as a custom build step. The current log style that esbuild uses doesn't conform to this specific style.

    With this release, esbuild has a new log style for Visual Studio (and other tools in the MSBuild ecosystem) that can be enabled with --log-style=visualstudio. Here is an example log message in this style:

    $ esbuild example.ts --log-style=visualstudio
/Users/evan/dev/esbuild/example.ts(1,29): warning ES0010: Operator "*" should not directly follow a TypeScript type cast after the "+" operator

    This log style is also available via the JS and Go APIs, and can now be used with the existing formatMessages API.

  • Fix a bug with CSS gamut mapping (#​4488)

    Due to a typo, the fallback colors generated for CSS colors outside of the sRGB gamut weren't correct. This release fixes the generated colors to use the intended algorithm.

    This fix was submitted by @​chatman-media.

ArnaudBarre/eslint-plugin-react-refresh (eslint-plugin-react-refresh)

v0.5.7

Compare Source

Add allowCompoundComponents option (#​117)

Default: false (true in vite config)

Don't warn when components are exported as an object gathering them. Every member of the object must be a component, and a member holding an anonymous function requires a component name as key.

This should be enabled if the fast refresh implementation correctly handles this case. Vite supports it since @vitejs/plugin-react 4.7.0, @vitejs/plugin-react-swc 3.11.0.

{
  "react-refresh/only-export-components": [
    "error",
    { "allowCompoundComponents": true }
  ]
}

Enabling this option allows code such as the following:

const Root = () => <></>;
const Label = () => <></>;
export const Tag = { Root, Label };

v0.5.6

Compare Source

  • Support re-exporting namespace components (fixes #​116)

v0.5.5

Compare Source

  • Fix SCREAMING_SNAKE_CASE constant exported via export { Name } incorrectly treated as React component #​114 (fixes #​113)
  • Add contentType and size to allowExportNames in Next config #​115

v0.5.4

Compare Source

  • Add instant to allowExportNames in Next config #​112
nickjvandyke/eslint-plugin-react-you-might-not-need-an-effect (eslint-plugin-react-you-might-not-need-an-effect)

v1.0.2

Compare Source

Miscellaneous Chores
webpro-nl/knip (knip)

v6.40.0: Release 6.40.0

Compare Source

v6.39.0: Release 6.39.0

Compare Source

v6.38.0: Release 6.38.0

Compare Source

v6.37.0: Release 6.37.0

Compare Source

  • fix(graphql-codegen): mark near-operation-file outputs as entries, not the documents directory (#​2048) (06a68fc) - thanks @​RobHannay!
  • fix: enable JSX in the config loader (#​1959) (5b21dc9) - thanks @​addielaruee!
  • Match binaries only to their actual dependency providers (c5bdb69)
  • Preserve executable references across package manager commands (54af171)
  • Correct binary provider metadata in Relay fixtures (e67dfcb)
  • Separate shell binary expectations from reporting exemptions (resolve #​2022) (c1d7d75)
  • Respect npx no-install flags before the executable (4237010)
  • Update dependencies (038ea17)
  • Remove npm auth check now that's in release-it (4aaf77c)
  • Fix --format name resolution in the ESLint plugin (#​2046) (1269e98) - thanks @​bytedoe!

v6.36.0: Release 6.36.0

Compare Source

v6.35.1: Release 6.35.1

Compare Source

v6.35.0: Release 6.35.0

Compare Source

v6.34.0: Release 6.34.0

Compare Source

v6.33.0: Release 6.33.0

Compare Source

❗ Important

✂ PR body was truncated to here.

Configuration

📅 Schedule: (in timezone Europe/Lisbon)

  • Branch creation
    • "before 5am on monday"
  • Automerge
    • At any time (no schedule defined)

🚦 Automerge: Enabled.

♻ Rebasing: Whenever PR is behind base branch, or you tick the rebase/retry checkbox.

👻 Immortal: This PR will be recreated if closed unmerged. Get config help if that's undesired.

  • If you want to rebase/retry this PR, check this box

This PR was generated by Mend Renovate. View the repository job log.

@renovate
renovate Bot force-pushed the renovate/dev-minor+patch branch 10 times, most recently from 25ad275 to fbad839 Compare October 9, 2026 05:36
@renovate
renovate Bot force-pushed the renovate/dev-minor+patch branch from fbad839 to af4259b Compare October 9, 2026 18:53
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment

Reviewers

No reviews

Assignees

No one assigned

Labels

None yet

Projects

None yet

Milestone

No milestone

Development

Successfully merging this pull request may close these issues.

0 participants